The characteristics of automobile aluminum cleaning agent are as follows:
1. This product has low foam performance, suitable for spray equipment or ultrasonic cleaning equipment.
2. This product is non-toxic and non-irritating, and can be safely used without polluting the environment after use.
3. The product has no corrosion on the surface after use, and does not affect the subsequent processing process.
4, this product contains a variety of surfactants, decontamination effect is good, can clean the aluminum alloy machined surface oil.
5. This product not only has good cleaning property, but also has certain anti-rust property. It is suitable for treating the surface of aluminum alloy, copper alloy and magnesium alloy, and also suitable for short-term anti-rust use between working procedures.
7. If the anti-rust period of aluminum alloy surface is longer, water-based anti-rust agent can be used for treatment. Cleaning agent for aluminum parts:
8, the use of aluminum alloy cleaning agent, magnesium alloy cleaning agent, copper alloy cleaning agent diluted to about 3-5%, for the wet oil film is used at room temperature, for the dry oil film is used at 50-60 ℃, can also use the company's metal surface oil cleaning agent cleaning oil.
Cleaning procedures of automobile aluminum parts with cleaning agent:
1. Clean the ultrasonic cleaning tank;
2. Inject a certain amount of clean water according to the size of the cleaning tank;
3. Heat the ultrasonic cleaning tank water to 50-70 degrees;
4, before using LT - Ⅰ aluminum barrel for special cleaning fluid mix;
5, according to how much oil tank in the water and aluminum components according to the ratio of 3% to 5% add LT - Ⅰ cleaning fluid;
6. Put the aluminum parts to be cleaned into the cleaning tank, and the oil will be cleaned after 1-5 minutes;
Online customer service